Dealer portal
Accessories and spare part
6522-U20 Grain set with 7 ring grains
Grit set 6522-U20, 7 grits, Ø 3.2; 3.4; 3.6; 3.8; 4.0; 4.1; 4.3 mm. For front sight M18.
Further information
item no.: 004196
6586-20 cover sleeve f. front sight, black ++++
Made of special synthetic, black, for front sight. Only while stocks last.
Further information
item no.: 001410
6822-U14 Set of plasticfront sight inserts incl.clamping screw
8 cords, diam. 3.1/3.3/3.4/3.5/3.7/3.9/4.1/4.3 mm. Incl. clamping screw (without internal thread). For front sight M18.
Further information
item no.: 013112
6830/1 spirit level with scale, vial inside prone position
Green, inside, scale black/silver.
Further information
item no.: 001072
6852-05 lens, optical 0.3 diopter for front sight M18 ++++
Easy screw-in 0.3 diopter for 18 mm visors. With internal thread for spirit level.
Further information
item no.: 001389
6852-05 lens, optical 0.5 diopter for front sight M18
With 0.5 dioptre. (corresponds to 1.5 times magnification).
Further information
item no.: 001390
6930 spirit level with scale, level on top prone position
Green, overhead, scale, black/silver.
Further information
item no.: 001073
9736 aperture insert Vario Swing 2.8-4.8 mm
Diam. 2.8 - 4.8 mm, adjustable, for M18 x 0.5.
Further information
Item no.: 001388
9740 Super iris ring grit 2.8-4.8 mm
Super iris aperture 9740, Ø 2.8-4.8mm, adjustable. The rear sight can be adjusted from cross hair to lateral hair with a tool supplied and thus individually adapted to the shooter's wishes. This aperture insert is additionally supplied with a larger knurled ring to...
Further information
Item no.: 001382
9744 Super iris glass grain 2.8-4.8 mm
Duchm. 2.8 - 4.8 mm, for M18x0.5, adjustable.
Further information
item no.: 001383
9750 Duo-aperture insert 2.8-4.8 mm M18
With cross hair/lateral hair.2.8-4.8 mm inner diameter, adjustable.6.4-9.0 mm outer diameter, adjustable.
Further information
item no.: 001391
clamping screw for plasticfront sight inserts M18
For synthetic-front sight inserts 6522-14, with female thread.
Further information
item no.: 016640
M18 front sight-radial tilting
front sight CENTRA, incl. front sightclamping screw and transparent front sight, radial tilting. Suitable for ANSCHÜTZ models 1903- 2013, 2002 and 8002, as well as air rifles.
Further information
item no.: 000982
M22 front sight-radial tilting
front sight CENTRA, incl. hole punchclamping screw and transparent hole punch, radial tilting. Included is a transparent hole punch 4.0. This front sight does not fit on Match54.material:
Further information
item no.: 013695
protection cap for mechanical sight set ++++
White synthetic protection cap to protect your grain tunnel from dust and dirt.
Further information
item no.: 001409