For the discipline benchrest, which is geared towards maximum precision, ANSCHÜTZ has embedded the target small bore barreled action 1907 in a specially developed benchrest stock BR-50. This combination offers the best basis for the smallest scattering circles.
-
Configure directly now!Configure directly now!
-
Configure directly now!Configure directly now!
FEATURES
Barreled action - 1907
The reinforced muzzle is equipped with an 11 mm prism rail , which makes it possible to mount a front sight .
1 of 5High-precision ANSCHÜTZ target barrel.
2 of 5The sleeve is equipped with an 11 mm prism rail , for attaching a diopter or a scope mount.
3 of 5When the Barreled action is in the tensioned state, a red indicator pin sticks out.
4 of 5The bolt knob is made of high-strength synthetic.
5 of 5The ANSCHÜTZ small bore barreled action for entry into the world of small bore shooting. Highest precision, solid workmanship, an always even ejection of the empty cartridge cases. This Barreled action offers everything you need for a successful start into the world of small bore shooting.
Trigger - 5018
The robust housing of the trigger protects the high-precision fine parts.
1 of 3The trigger blade can be adjusted in many ways. Whether swivelling, sliding or adjusting the height - this trigger blade leaves nothing to be desired.
2 of 3The smooth-running sliding safety guarantees maximum safety.
3 of 3ANSCHÜTZ Triggers are known worldwide for their quality. The trigger 5018, which breaks like glass, leaves nothing to be desired. With an adjusted trigger weight of 125 g, this trigger leaves our factory in Ulm. The trigger weight can be adjusted from 60 g - 490 g to suit your individual needs. The trigger blade can be moved, swivelled and adjusted in height. There is nothing better!
Stock - BR 50 Walnut
The rubber butt plate 4709A can be adjusted in height and swivelled. This butt plate offers a wide and non-slip contact surface in the shoulder.
1 of 4 The grip section of the stock is kept straight in order to guide the trigger hand always in the same position to the trigger , and thus to ensure a neat benchrest of the trigger finger on the trigger blade . 2 of 4The wide and absolutely flat fore-end can be replaced quickly and easily if damaged. This guarantees a flat fore-end at all times.
3 of 4The BR 50 benchrest stock is made of beautifully grown walnut.
4 of 4The BR 50 benchrest stock made of beautifully grown walnut wood was specially developed for benchrest shooting. The natural stock is equipped with a very wide and flat fore-end to obtain a maximum contact surface and thus achieve the smallest scattering circles.
Scope of delivery
- Tool set
- Styrofoam transport box