22MAX
Maximum performance
Shown with optional equipment. Supplied without sight set. Selection of sight set via the product configurator or via the accessories program.
Anschütz 22max
22 MAX - Maximum performance. The new ANSCHÜTZ Premium small bore target rifle was developed with this claim in mind. Numerous innovative details make this small bore rifle the master of its class. A worldwide unique, completely new developed bolt action, a concept for the storage of the barreled action in the stock trimmed to the highest precision, as well as the highest demands on the selection of the materials used. All this at high end premium level - 22MAX!
FEATURES
Barreled action - 22MAX
Trimmed for highest precision

The 660 mm barrel is extended by a muzzle tube to achieve an even longer sighting line. An 11 mm prism rail is attached to the muzzle tube, for mounting a front sight. Additionally, a SCATT adapter can be attached to the underside.
1 of 6The polymer ball can be moved freely and thus adapted to the individual vibration behavior of the barrel. This allows the barrel to be tuned for a wide variety of ammunition types.
2 of 611 mm prism rail, to accommodate a diopter.
3 of 6Match trigger 5018.
4 of 6Worldwide unique bolt action.
5 of 6ANSCHÜTZ precision barrel, 660 mm.
6 of 6
Bolt, open.
1 of 1
Bolt, closed.
1 of 1
Typical test fire group of the 22MAX. 10 rounds shot at 50m with premium ammunition.
1 of 1Highest precision - that's what the 22MAX was developed for! The worldwide unique bolt action, the polymer ball for individual oscillation behavior of the ANSCHÜTZ precision barrel and the well-known world-class trigger 5018 ensure the smallest scattering circles. Everything in the well-known ANSCHÜTZ quality!
Bolt
Unique bolt action

Unique bolt with extremely short firing pin.
1 of 1
Guide rail on which the bolt runs.
1 of 4Bolt.
2 of 4Extremely short firing pin.
3 of 4Bolt handle, easily removable.
4 of 4
Bolt with locking claws.
1 of 1

The bolt locking slides on both sides hold the bolt securely in position. The bolt can be removed quickly by simply pushing it up.
1 of 1The very light and short firing pin of the 22MAX system guarantees minimum
shot development times. In addition, the firing pin hits the cartridge centrally at the lower
case edge, which causes a uniform ignition of the propellant charge and has a positive effect on the overall precision of this high-end small-bore rifle as a further detail.
To access the 22MAX to set the safety, the loading lever, which is by a ball detent safe, can be easily pulled off, thus preventing the operation and cocking of the rifle. The large, symmetrically designed bolt claws evenly dissipate the bolt forces and provide maximum safety. The Barreled action can be adjusted by sliding safety to set the safety. Furthermore, the bolt can be removed quickly and easily by loosening the two safety slides on both sides.
Trigger - 5018
The perfect interface between man and rifle

The robust housing of the trigger protects the high-precision fine parts.
1 of 2The trigger blade can be adjusted in many ways. Whether swivelling, sliding or adjusting the height - this trigger blade leaves nothing to be desired.
2 of 2Precision
Individual vibration behavior

The barrel bearing block is freely movable and can thus be adapted to the individual vibration behavior of the barrel.
1 of 2The elasticity of the polymer ball allows the material to expand without distortion due to heat generated by shooting.
2 of 2The barreld action's floating bearing holds the barrel radially in position using a polymer ball. The elasticity of the polymer ball allows the material to expand without tension due to the heat generated by the ready to fire . Furthermore, the barrel bearing block in which the polymer ball is mounted can be freely displaced and thus adjusted to the individual vibration behavior of the barrel. This has the advantage of tuning the barrel for a wide variety of ammunition types without having to attach additional weights to the tube. Thus, the balance of the rifle remains almost unchanged.
Stock - 22MAX
Innovative, ergonomic, breathtaking

The grip made of walnut wood with non-slip black coating is quick and easy to assemble and change. The grip is available in sizes S, M and L.
1 of 3High quality stock made of aluminum.
2 of 3Versatile adjustable butt plate.
3 of 3
The fore-end raiser block can be moved continuously and tilted in all directions.
1 of 3The cheek piece can be moved continuously and adjusted in height. The jaw support can also be tilted by up to 15 degrees. A longer jaw support is included with the scope of deliverey.
2 of 3The trigger guard protects the trigger from impacts.
3 of 3
The fixed bearing and the banjo bolt of the system also serve as an integrated cleaning rod guide. Furthermore, all surfaces of the system and the closure are "simply" designed and can therefore be cleaned quickly and effectively.
1 of 1
the stock is 9 mm set, thus providing the ideal position and excellent contact of the head with the cheek piece.
1 of 1Innovative details make the stock what it is: unique! Whether it's the innovative grip connection with memory function, the ergonomic 9° angle of the buttstock for excellent contact of the head with the cheek piece or the many individual adjustment options on the fore-end raiser block, butt plate and cheek piece. This stock - a class of its own!
Butt plate
Full contact to each shoulder

The robust hook can be swiveled continuously and thus perfectly adjusted to the shooter.
1 of 3The contact elements can be offset, moved and swiveled. This allows the contour of each shooter's shoulder to be optimally reproduced.
2 of 3After releasing the locking wheels, the butt plate can be moved continuously in height.
3 of 3
Fine adjustment of the length of pull can be made using the fine adjustment wheels.
1 of 2Fine adjustment of the butt plate height can be made using the fine adjustment wheel.
2 of 2The butt plate for optimum contact with the shoulder. Length and height of the butt plate can be adjusted continuously and have adjustment wheels for fine adjustment. The hook can be swiveled 50 degrees to the left or right, the rear hook element can also be adjusted by 30 degrees. The feature that makes butt plate so unique is the eight contact elements. These make it possible to adjust to the individual shape of each shooter's shoulder and thus create an even, full contact. The contact elements can be freely offset to find the optimum contact point. The four middle contact elements can also be moved to the left and right, and the four outer ones can be swiveled up or down.
Cheek piece
Relaxed head position

Coarse adjustment of the cheek piece via the silver locking wheel.
1 of 2Fine adjustment of cheek piece via the red fine adjustment wheel.
2 of 2
The position of the cheek piece can be adjusted via the silver fine adjustment wheels.
1 of 1
The hexagon socket screws rest directly on the stock and can thus be used for further coarse adjustment of the cheek piece height.
1 of 1
The jaw support can be moved continuously. A longer jaw support is also included with the scope of deliverey.
1 of 1Versatile adjustment options that inspire. The front Allen screws lie directly on the stock and can thus be used for rough height adjustment. Continuous fine adjustment of the height is possible via the red adjustment wheel. The jaw support can be moved continuously forwards or backwards. To do this, it can be tilted by up to 15 degrees using the small adjustment wheels on the rear. A longer jaw support is also included with the scope of deliverey.
Fore-end raiser block
The success is in your hand

The laterally mounted fine adjustment wheels enable horizontal and lateral tilting of the palm rest
1 of 2The palm rest can be released and fixed extremely quickly with the help of the red quick-release fastener
with only 1/4 turn.

The fore-end raiser block can be moved continuously along the stock.
1 of 1
The hand rest can be moved to the left and right.
1 of 1The innovative palm rest can be loosened and fixed extremely quickly with the help of the red quick-release fastener with only 1/4 turn for maximum time savings in the 3-position competition. The palm rest has a very compact design, has an extremely grippy base plate and can be moved to the right and left as well as to the front and rear, thus placing the center of gravity as close as possible to the shooter. Another advantage is the maximum flexibility of mounting individual base plates without having to sacrifice the wide range of adjustment options. The laterally mounted fine adjustment wheels allow horizontal and lateral tilting of the palm rest. Optionally, the height of the palm rest can be increased by intermediate plates for the maximum best position.
Grip
Integrated memory function

The grip made of walnut wood with a non-slip black coating has a fluted inside. This allows the shaft to be brought even closer to the body. The grip is available
in sizes S, M and L.

The adjustments of the grip, such as the inclination and rotation, are made via the grip attachment integrated in the grip.
1 of 1The grip made of walnut wood with a non-slip coating can be mounted and changed quickly and easily, with a decisive advantage: the settings of the grip, such as the inclination and rotation, are made via the grip attachment integrated in the grip. The advantage is obvious: for each stop position, a grip can be mounted, adjusted and dismounted again. Thus, the grips with all the settings made can be changed depending on the discipline with just one screw, similar to what is already used with the butt plates.
Tube
Optimal sighting line

The front sight can be moved along the tube to set the optimal sighting line.
1 of 1The 660 mm barrel is extended but the muzzle tube . This allows the front sight to be continuously shifted to 250 mm and the sighting line length to be adjusted to the individual wishes of each shooter. On the underside of the muzzle tube is a prism rail for mounting a SCATT unit.
Scaling
Fine tuning down to the millimeter
Continuous and consecutive numbering of the scales across the entire rifle and all attachments prevents confusion of the settings that are made and noted. A defined number describes a fixed point on the rifle. Each number occurs only once.
Scope of delivery
The following items are always included in the delivery, regardless of how you configure the product!
- Transport rifle case MEGA
- hand stop 6226
- Long jaw support
- Original test fire group
- Tool set
Configurator
Your personal 22MAX - According to your wishes
Grip size
Have everything at grip

22 MAX grip S

22 MAX grip M

22 MAX grip L

22 MAX grip S

22 MAX grip M

22 MAX grip L
Sight sets
The goal always in sight

rear sights 8012 - 12 clicks
The new rear sights series 8000 was developed and produced according to the highest quality standards. The use of stainless steel makes the rear sights weatherproof. Thanks to a comprehensive range of accessories, the rear sights is suitable for biathlon as well as for sport small bore- and air rifles. For more information about the new diopter series 800, click here.

sight set7020/20 complete with front sightM22

sight set 7020/20 complete with front sight M18

sight set 7020/10 complete with front sight M18

sight set6834 complete with front sightM22

sight set 6834 complete with front sight M18

Without sight set

rear sights 8012 - 12 clicks

sight set7020/20 complete with front sightM22

sight set 7020/20 complete with front sight M18

sight set 7020/10 complete with front sight M18

sight set6834 complete with front sightM22

sight set 6834 complete with front sight M18

Without sight set
Butt plate
For the perfect position

butt plate 22MAX

Hook shank cap MASTER

Without butt plate

butt plate 22MAX

Hook shank cap MASTER

Without butt plate
Recommended accessories for your target small bore rifle
For the finishing touch

sight raiser blockXXL
18 mm height

anti-glare tube for diopter series 80XX
The robust ANSCHÜTZ aluminum anti-glare tube is milled from solid material and prevents disturbing light from the sides and ensures a clear view of the target.

ANSCHÜTZ Cap - black
Made of sturdy fabric, with attractive ANSCHÜTZ embroidery on the front, adjustable in size.

sight raiser block6817
The sight raiser block6817 increases the sighting lineby 8 mm. This allows you to further optimise your position.

Soft case for hunters and target shooters
For the safe transport of your hunting or sporting rifle. As a special feature, the new carrying strap system allows you to carry the case on your back - incl. case lock.

sight raiser blockXXL

anti-glare tube for diopter series 80XX

ANSCHÜTZ Cap - black

sight raiser block6817
