-
Configure directly now!Configure directly now!
-
Configure directly now!Configure directly now!
FEATURES
Barreled action - 54.30
The ejection window has been moved 30 mm to the rear, towards the shooter, for even better ergonomics.
1 of 5On the sleeve there is an 11 mm prism rail for mounting a diopter.
2 of 5The barrel is screwed deep into the sleeve. This distributes the stresses over a large area, which increases precision.
3 of 5ANSCHÜTZ Precisiontarget barrel
4 of 5The 660 mm barrel is extended by a muzzle tube to achieve an even longer sighting line. An 11 mm prism rail is attached to the muzzle tube for mounting a front sight tunnel.
5 of 5The new ANSCHÜTZ Target small bore barreled action 54.30 is the further development of the legendary ANSCHÜTZ Match 54 barreled action. Barreled action 54.30 combines new ideas and requirements from the modern target shooting with components that have been tried and tested for decades.
- The basis for the new development is the well-known and proven Barreled action Match 54.
- The ejection window has been moved back by 30 mm and reduced in size by 18%. This improves the ergonomics when shooting and increases the stiffness of the case by 33%.
- The bolt and the firing pin were shortened by 30 mm.
- The weight of the firing pin has been reduced, thus reducing the locktime with the same force of the firing pin spring.
- The shooting performance is further improved by the newly developed match cartridge bearing.
- In the Barreled action Match 54.30, the barrel is screwed deeply into the sleeve in order to distribute the tension created in the joint as evenly as possible and over a large area.
- Maintenance-friendly and durable overall construction, as usual with ANSCHÜTZ.
Trigger - 5018
The robust housing of the trigger protects the high-precision fine parts.
1 of 3The trigger blade can be adjusted in many ways. Whether swivelling, sliding or adjusting the height - this trigger blade leaves nothing to be desired.
2 of 3The smooth-running sliding safety guarantees maximum safety.
3 of 3ANSCHÜTZ Triggers are known worldwide for their quality. The trigger 5018, which breaks like glass, leaves nothing to be desired. With an adjusted trigger weight of 125 g, this trigger leaves our factory in Ulm. The trigger weight can be adjusted from 60 g - 490 g to suit your individual needs. The trigger blade can be moved, swivelled and adjusted in height. There is nothing better!
Stock - 1914
The aluminum-hook butt plate 2213-8700 is versatilely adjustable and can easily be adapted to individual needs with only an Allen key SW4.
1 of 5Multifunctional, stably guided and infinitely variable cheek pieces-grid adjustment with particularly large adjustment ranges and fine adjustment of the height and windage.
2 of 5The trigger guard protects your trigger from shocks.
3 of 5A aluminum UIT rail is integrated in the fore-end for mounting a fore-end raiser block or hand stops.
4 of 5The grip area is equipped with a non-slip stippled checkering so that you always have a safe and firm grip on your sports equipment even when your hands are wet.
5 of 5Scope of delivery
- Transport rifle case MEGA
- hand stop 6226
- Fore-end raiser block
- Accessories box
- Tool set
Configurator
Version
How to guide your rifle
Right hand version
Left hand version
Right hand version
