Yes. Please use only a power bank or rechargeable battery that is specifically configured for the LaserPower Target’s input voltage. Using other supply voltages can damage the electronics in the LaserPower Target. The positive terminal is on the inside, and the negative terminal is on the outside. Before using a power bank or rechargeable battery, please make sure to check the voltage required to power the LaserPower Target:
ATTENTION:
For LaserPower Ziel versions 2.x, the target input voltage is 6.0 V. For LaserPower Ziel versions 3.x and later, the target input voltage is 5.0 V. The output voltage of the PowerBank/battery must be set accordingly.
