Where can I find general safety advice?
General and specific safety instructions can be found in our operating instructions.
FAQs
Does ANSCHÜTZ still have parts for the SAM M10 and M5 pistols?
ANSCHÜTZ has unfortunately not had any spare parts for the SAM M10 and M5 pistols for years.
Does ANSCHÜTZ still have parts for the SAM M10 and M5 pistols? Read more "
How far apart must the laser targets be so that when they are switched off with the remote control, the neighbouring target is not switched off as well?
According to the manufacturer, the bolt throw of the remote control is 30°. With the laser beam set by the manufacturer to a firing distance of 10 m, the targets must be at least 6 meters apart so that only the target aimed at is switched off. There is no "remote control - target coding". In practical tests, however, we were able to combine the targets to within 1 meter,
What should be considered when dealing with compressed air cylinders ?
Please read our manufacturer's information. IMPORTANT: Only original ANSCHÜTZ compressed air cylinders (max. 200 bar) may be used! Failure to do so will invalidate the liability and warranty! Non-compliance can lead to very expensive repair costs for your air rifle and, in the worst case, to serious personal injury. -------------------------------------------------------------------------------------------------------------- IMPORTANT NOTE: As your safety is very important to ANSCHÜTZ, the original ANSCHÜTZ compressed air cylinders
What should I bear in mind when dealing with compressed air cylinders ? Read more "
Which weapons laws must be observed when handling weapons or buying and selling them?
The German gunsmith Association provides a comprehensive overview of current legislation, regulations and recommendations in this area.
Which weapons laws must be observed when handling weapons or buying and selling them? Read more "
How should a compressed air cylinder be disposed of?
compressed air cylindersCartridges that are defective or older than 10 years must be emptied safely and disposed of as scrap metal in accordance with local regulations or, if necessary, at the recycling station. If you wish to send us the cartridge, we will be happy to dispose of it free of charge, but not the shipping costs.
How should a compressed air cylinder be disposed of? Read more "
Is the 8002 LIGHT suitable as a right/left version or does it always have to be converted?
It has to be modified because of the handle, or a universal ONE grip is used.
Can the air rifle cocking lever of models 9015, 9003, 8002, 8001 be converted?
Yes, download the operating instructions for these air rifles - chapter cocking, loading, to set the safety .
Can the air rifle cocking lever of models 9015, 9003, 8002, 8001 be converted? Read more "
Is it possible to convert from CO2 to compressed air ?
No. For safety reasons, the compressed air technology must generally not be manipulated.
Is it possible to convert from CO2 to compressed air ? Read more "
