Dear business partner, a return of goods is always associated with high costs for you and ANSCHÜTZ and should be avoided if possible. ANSCHÜTZ requires some information from you so that a return shipment can be processed properly and correctly assigned to your customer account. Please note again the information contained in the ANSCHÜTZ General Terms and Conditions (GTC) [...].
Return of goods (within Germany) Read more "
Our articles are only released for sale after they themselves, the materials and all individual parts have undergone strict controls, or the rifle has proven its durability and function during firing. J.G. ANSCHÜTZ GmbH & Co. KG provides a full two-year guarantee against defects in material or workmanship (excluding stock and spring breakage), provided that a
What do I do in the event of a warranty/damage claim? Read more "
In order to ensure consistent accuracy in the long term, it is essential to clean the rifle regularly after shooting. The cleaning intervals and the cleaning intensity depend in particular on the number of shots fired, the caliber, the ammunition used and the individual development of the shot pattern of the individual rifle. The accessories market now offers a
How do I clean my rifle? Read more "
Yes, the ANSCHÜTZ synthetic hole cages 6522-14 and the ANSCHÜTZ clamping screw 6822-12 also fit the CENTRA-front sight M18. They are interchangeable! ATTENTION: The ANSCHÜTZ steel bar and ring cords do not fit the CENTRA-front sight M18!
For technical production reasons, the position of the barrel inscription / barrel marking may vary on model 54.30.
Please only use original ANSCHÜTZ partscompressed air cylinders and always observe the operating instructions! ANSCHÜTZ accepts no liability for damage of any kind caused by modifying parts, converting or installing non-original ANSCHÜTZ parts or by not following the operating instructions. CAUTION: The use of non-original ANSCHÜTZ compressed air cartridges will damage your air rifle and will invalidate the warranty.
Which compressed air cylinders may be used? Read more "
The answer can generally be affirmative, but the following points must be considered in advance: Adjustments may have to be made to the stock in the area of the safety by a gunsmith . It should also be noted that the sash lock on the match lock is no longer functional, as the sash lock can no longer be set to "safe" mode. The trigger 5018
Does a Match 54 or 1413 Match-KK-Barreled action fit into a 1918 Precise aluminum stock? Read more "
To seal the threaded holes on the locking sleeves of barreled actions 1780, 1770, Match 54 and Match 64, there is the set screw 1403-005, part number: 002864, price group: A1. We recommend using Loctite (threadlocker) on the screws to set the safety. 5 grub screws 1403-005 are required for Barreled action 1780 5 grub screws 1403-005 are required for Barreled action 1770 for Barreled action
Are there screws to close the threaded holes in the ANSCHÜTZ locking sleeves? Read more "
Both rear sights, the 7002 as well as the 6805, are suitable for all ANSCHÜTZ match rifles. Difference: In the rear sights 6805 the elevation adjustment slides in an adjustable V-block, the windage on a dowel pin. On the rear sights 7002 the elevation and windage run on ground ball bearings. This model also offers the option of tilt compensation. Both rear sights work
What is the difference between the 7002 and 6805 diopters? Read more "
Joint research with compressor manufacturers has clearly shown that the moisture content of the air can be attributed to damage caused by inadequate filtering of the compressed air produced before filling the compressed air cylinder . Please read the PDF below for more information.
What needs to be considered when it comes to humidity? Read more "
