Please use only genuine ANSCHÜTZ power supplies, which are specifically configured for the input voltage of the LaserPower target. Using non-genuine ANSCHÜTZ power supplies or other supply voltages may damage the electronics in the LaserPower target.
The positive terminal is on the inside, and the negative terminal is on the outside.
Before using a power supply, please make sure you know what voltage is required to power the LaserPower target.
ATTENTION:
For LaserPower Ziel versions 2.x, the target input voltage is 6.0 V. For LaserPower Ziel versions 3.x and later, the target input voltage is 5.0 V. The power supply's output voltage must be set accordingly.
The targets are equipped with reverse polarity protection, i.e. when the power supply unit is plugged in, the battery circuit is switched off. Thus, the batteries do not have to be removed when the power supply unit is plugged in.
