Shown with optional equipment. Supplied without sight set. Selection of sight set via the product configurator or via the accessories program.
Shown with optional equipment. Supplied without sight set. Selection of sight set via the product configurator or via the accessories program.
Discover the revolutionary ONE stock design for ANSCHÜTZ small bore actions 54.30 - The upgrade for your .22 l.r. target rifle! Level up to a modern aluminum stock and reach new athletic heights with your familiar barreled action. With modern, futuristic elegant design and optimal comfort, the ONE stock offers flexibility and precision simultaneously. Enjoy the unique balance of this stock, combined with the vibration behavior which is unique to aluminum stocks, and close to the classic wooden stocks. This is achieved by clamping the action with only one high-strength synthetic clamping sleeve, which evenly absorbs and dissipates vibrations.
-
Configure directly now!Configure directly now!
-
To the technical data!To the technical data!
-
Configure directly now!Configure directly now!
-
To the technical data!To the technical data!
FEATURES
Barreled action - 54.30
The ejection window has been moved 30 mm to the rear, towards the shooter, for even better ergonomics.
1 of 5On the sleeve there is an 11 mm prism rail for mounting a diopter.
2 of 5The barrel is screwed deep into the sleeve. This distributes the stresses over a large area, which increases precision.
3 of 5ANSCHÜTZ Precisiontarget barrel
4 of 5The 660 mm barrel is extended by a muzzle tube to achieve an even longer sighting line. An 11 mm prism rail is attached to the muzzle tube for mounting a front sight tunnel.
5 of 5The new ANSCHÜTZ Target small bore barreled action 54.30 is the further development of the legendary ANSCHÜTZ Match 54 barreled action. Barreled action 54.30 combines new ideas and requirements from the modern target shooting with components that have been tried and tested for decades.
- The basis for the new development is the well-known and proven Barreled action Match 54.
- The ejection window has been moved back by 30 mm and reduced in size by 18%. This improves the ergonomics when shooting and increases the stiffness of the case by 33%.
- The bolt and the firing pin were shortened by 30 mm.
- The weight of the firing pin has been reduced, thus reducing the locktime with the same force of the firing pin spring.
- The shooting performance is further improved by the newly developed match cartridge bearing.
- In the Barreled action Match 54.30, the barrel is screwed deeply into the sleeve in order to distribute the tension created in the joint as evenly as possible and over a large area.
- Maintenance-friendly and durable overall construction, as usual with ANSCHÜTZ.
Trigger - 5018
The robust housing of the trigger protects the high-precision fine parts.
1 of 3The trigger blade can be adjusted in many ways. Whether swivelling, sliding or adjusting the height - this trigger blade leaves nothing to be desired.
2 of 3The smooth-running sliding safety guarantees maximum safety.
3 of 3stock - ONE
The forward-thinking design of the ONE stock enables seamless integration of an existing 54.30 barreled action and can be perfectly adapted to it. A self-centering synthetic clamping sleeve connects the stock and barreled action and ensures a unique and always consistent vibration behavior - similar to a wooden stock! In addition, many existing ONE air rifle stock accessories can be fitted to the rear stock. It is also possible to fit the complete ONE air rifle rear stock! The grip can be selected in sizes S, M and L via the configurator.
The aluminum-hook butt plate 4765 is versatile and can be easily adapted to individual requirements.
1 of 8The Cheek piece can be infinitely adjusted in almost any direction and can thus be optimally adapted to each shooter.
2 of 8By simply loosening just one screw, the buttstock incl. grip can be separated from the fore-end in seconds and then reassembled with repeat accuracy and backlash-free to form a 100 % tight connection.
3 of 8The trigger guard protects your trigger from shocks.
4 of 8Ergonomically designed benchrest grip.
5 of 8The high-strength fore-end encloses the barrel, creates stability and offers space for additional weights that can be attached to the carbon tube.
6 of 8The grip is made of beautifully grown walnut and has a hollowed-out inside. This allows the stock to be brought even closer to the body.
7 of 8The SOLID Vario benchrest rail is movable and can be tilted/swiveled laterally by almost 360 degrees around the carbon tube on the ONE stock.
8 of 8System connection - ONE
The collet chuck ensures a firm connection between the shank and Barreled action.
1 of 1The ONE stock concept allows the KK-Barreled action to swing comfortably from shot to shot. The high-strength, self-centering plastic collet holds the Barreled action securely in the action carrier, and transmits the vibrations from the ready to fire evenly to the stock - for an always even and smooth swinging action, which is unique in the aluminumstocks range.
Steel core - ONE
The core of the buttstock is made of steel, which also acts as a counterweight to the fore-end and thus perfectly balances the rifle.
1 of 1
The 20 mm offset of the rear stock allows it to be brought even closer to the body.
1 of 1The core of the rear stock is made of high-quality steel. This creates a counterweight to the fore-end, which balances it perfectly. The rear stock is offset by 20 mm, allowing the rifle to be brought even closer to the body.
Butt plate connection - ONE
The butt plate bracket offers the option of mounting various butt plates from all well-known manufacturers.
1 of 1The ONE stock comes with the familiar PRECISE butt plate extension. This offers the familiar and proven options for mounting a wide range of butt plates from all well-known manufacturers. Existing PRECISE butt plates or ANSCHÜTZ butt plate 4765 (formerly 2213-8700) can also be fitted without any problems.
Cheek piece connection - ONE
The red safety ring enables a positive fit with the rear stock. This makes it easy to mount the cheek piece quickly and with repeat accuracy. The advantage of this safety ring is obvious: a complete cheek piece can be purchased and perfectly adjusted for each shooting position. Thanks to the positive fit, the safety ring guarantees that the various cheek pieces are always positioned consistently without having to make any changes to the cheek piece itself.
Order and scope of deliverey stocks
- VARIO-palm rest 4844
- PRECISE butt plate carrier
- Quick couplers adapter
- Assembly instructions
- Tool set
item no.: 018500 (grip S, right)
item no.: 018498 (grip M, right)
item no.: 018501 (grip L, right)
Order and scope of deliverey rifle configuration
- Transport rifle case MEGA
- Solid benchrest rail with quick clamping
- benchrest grip
- ONE cheek piece adjustment
- Rear sight shift
- sight riser block
- PRECISE butt plate carrier
- butt plate 4765 without hook
- Quick couplers adapter
- Assembly instructions
- Tool set
- Quality control card with original test fire group
Available standard configurations
item no.: 019211 (grip M, right)
item no.: 019212 (grip L, right)
item no.: 019226 (grip M, left)
item no.: 019227 (grip L, left)
Configurator
Version
How to guide your rifle
Right hand version
Left hand version
Right hand version
Left hand version
1827 F - stock
Lies optimally in the shoulder
BIONIC stock color Standard
BIONIC stock color Individual according to RAL
BIONIC stock color Standard
BIONIC stock color Individual according to RAL
1827 F - Barreled action
High precision for your success!
1827 F biathlon Small bore barreled action - Heavy barrel
1827 F biathlon Small bore barreled action - standard barrel
1827 F biathlon Small bore barreled action - Heavy barrel
1827 F biathlon Small bore barreled action - standard barrel
1827 F - grip
The interface
BIONIC grip XS
BIONIC grip S
BIONIC grip M
BIONIC grip L
BIONIC grip Individual
BIONIC grip XS
BIONIC grip S
BIONIC grip M
BIONIC grip L
BIONIC grip Individual
1827 F - middle hand rest
Perfectly laid
Hand rest Standard
Hand rest Alexa
Hand rest Annett
Hand rest Sabrina
Hand rest Individual
Hand rest Standard
Hand rest Alexa
Hand rest Annett
Hand rest Sabrina
Hand rest Individual
1827 F - hand stop
Ergonomically shaped
BIONIC hand stop Standard
BIONIC hand stop EXTRA Long
BIONIC hand stop Standard
BIONIC hand stop EXTRA Long
1827 F - trigger
Fine adjustable
5020 two stage trigger
5020 two stage trigger
1827 F - trigger blade
At the interface
Trigger blade Match, black
trigger blade Match versatile adjustable, silver color
Trigger blade Match, black
trigger blade Match versatile adjustable, silver color
1827 F - magazine
Crucial reserves
Set of 4 - magazines 5-shot, cal. .22l.r.
Set of 4 - magazines 5-shot, cal. .22l.r.
1827 F - Replacement firing pin
For the case of emergency
Without replacement firing pin for Barreled action 1827 F
With replacement firing pin for Barreled action 1827 F
Without replacement firing pin for Barreled action 1827 F
With replacement firing pin for Barreled action 1827 F
1827 F - rear sights
The goal in sight
8012 B biathlon rear sights with snow protection flap
The new rear sights series 8000 was developed and produced according to the highest quality standards. The use of stainless steel makes the rear sights weather resistant. The novel design of this diopter prevents pressure pain in the back area during biathlon use while the biathlon rifle is worn on the back.
Biathlon sight set 6827
8012 B biathlon rear sights with snow protection flap
Biathlon sight set 6827
1827 F - front sight
For optimal posture
biathlon front sight 6870
Standard - front sight 6870, without sight riser block.
sight riser block 8 mm
Front sight 6870, with additional sight riser block 8 mm to increase the front sight as well as the rear sights by 8 mm.
sight riser block 18 mm
front sight 6870, with additional sight riser block 18 mm to increase the front sight as well as the rear sights by 16 mm.
biathlon front sight 6870
sight riser block 8 mm
