Dealer portal

Accessories and spare part

4418 Cleaning rod guide for straight pull models 1827, 1727 and F27

Cleaning rod guide for ANSCHÜTZ straight pull barreled action models 1727 F, 1827 F, ahg F27 A. The ANSCHÜTZ cleaning rod guide facilitates the cleaning of your ANSCHÜTZ rifle with straight pull action. By using this cleaning rod guide, the chamber and the trigger unit are protected from...
Further information
item no.: 018900

4506 Torque wrench 4-12 Nm / SW4

The torque wrench is perfectly adapted for the assembly of ANSCHÜTZ products. Size SW 4 Adjustment range: 4 - 12 NM
Further information
Item no.: 001176

507 Cleaning set (cord and wicks)

The cleaning wicks press into the rifling of the barrel and remove all powder and dirt residues. No need to remove the lock. For long guns and pistols. Tear-resistant up to 60 kg. For all caliber including air rifles. Very light and fits everywhere....
Further information
Item no.: 001491

508 Cleaning wicks

Refill pack for art. no. 001491. 32 cleaning wicks for long guns and pistols.
Further information
Item no.: 001492

JW-barrel cleaner (Patches)

100 pieces, for all caliber, very absorbent, extremely tear-resistant, low linting.
Further information
Item no.: 011602

Cleaning rod with PVC-grip 3,5

Cleaning kit incl. cleaning rod with rubber coating and PVC-grip. For rifles caliber .22 l.r.
Further information
Item no.: 011603

Cleaning rod guide for Match 64 models

Cleaning rod guide, for small vore target rifles Match 64. Material: aluminum Prevents the chamber from being damaged when cleaning with the cleaning rod and protects the trigger mechanism from dirt and cleaning agents. The two O-rings keep the cleaning rod guide in position. The...
Further information
Item no.: 015123

Cleaning rod guide for model 1761

The new ANSCHÜTZ cleaning rod guide makes it easy to clean the ANSCHÜTZ 1761 in one simple operation. Simply remove the bolt and your magazine, install the cleaning rod guide just like your bolt. It locks into place with the catch on the receiver .Suitable...
Further information
Item no.: 015655

Cleaning kit (brass brush and cleaning rod)

Cleaning set (brass brush and cleaning rod). cleaning rod made of steel Ø 3.5 mm with PVC coating. Not thicker than Ø 5.3 mm, with PVC-grip, L=880 mm. Up to beginning of handle with W1/8" external thread. For caliber .22 l.r.
Further information
Item no.: 011604

Scroll up