We recommend "Rapid Bond" from KENT. Instructions: Degrease components with acetone. Use 4 x 0.2 mm spacers for bonding gap. Remove the coating on the sleeve and the burnishing on the ZF mounting feet using a Dremel. For further information see download.
Which adhesive do you recommend for scope mounts? Read more "
Please see our information in our data sheets.
What twist lengths and how many pulls do the different caliber have? Read more "
See our information in the current hunting catalogue or on the Internet under Links and Info.
Which stock types are available for ANSCHÜTZ hunting rifles? Read more "
See our information in the current hunting catalogue.
In which wood classes are ANSCHÜTZ hunting shafts available? Read more "
See our installation videos in our media library.
Are there also explanatory videos for the individual ANSCHÜTZ models? Read more "
There is a replacement lock for the Match64item no: 008034) pre-milled for the caliber .22l.r. This can be used for all 3 calibers, but the base groove for the respective cartridge diameter and the headspace must be milled individually. This work must be carried out by a qualified gunsmith . The rifle must then be presented to the state firearms inspector.
The ANSCHÜTZ eGun platform has nothing to do legally with J.G. ANSCHÜTZ GmbH und Co KG in Ulm / Donautal. Even if the sale is made via the eGun platform under the name and mention of the company ANSCHÜTZ or under the personal name of Mr. Jochen Anschütz. The ANSCHÜTZ eGun platform is also not a subdivision of the
The ANSCHÜTZ company no longer has any MIROKU spare parts. If you are interested in MIROKU spare parts, you can contact Mr. Jens Lübbers from the company Jagd Lübbers, for example. This company has bought up all remaining stocks of MIROKU spare parts from ANSCHÜTZ. As always: delivery only while stocks last. Contact address at that time: Jagd Lübbers owner Jens
General information on subsonic ammunition (subsonic): Some ammunition manufacturers have developed and launched small-caliber ammunition with a muzzle velocity of approx. 216 m/s (710 fps). This subsonic ammunition was developed for quiet use in conjunction with a sound moderator . This ammunition is considerably slower than commercially available small-caliber ammunition with a muzzle velocity of approx. 320 m/s (1050 fps). With
Is the use of subsonic ammunition in ANSCHÜTZ small bore rifles permitted? Read more "
Please only use original ANSCHÜTZ compressedcompressed air cylinders and always observe the operating instructions! ANSCHÜTZ accepts no liability for damage of any kind caused by alteration of parts, conversion or installation of non-original ANSCHÜTZ parts or failure to observe the operating instructions. ATTENTION: The use of non-original ANSCHÜTZ compressedcompressed air cylinders will damage your air rifle and invalidate the warranty. Further
Can NOT original ANSCHÜTZ-compressed air cylinders be used in ANSCHÜTZ rifles ? Read more "
Directly to the product website:
© J.G. Anschütz GmbH & Co. KG
