The ANSCHÜTZ company no longer has any MIROKU spare parts. If you are interested in MIROKU spare parts, you can contact Mr. Jens Lübbers from the company Jagd Lübbers, for example. This company has bought up all remaining stocks of MIROKU spare parts from ANSCHÜTZ. As always: delivery only while stocks last. Contact address at that time: Jagd Lübbers owner Jens [...]
General information on subsonic ammunition (subsonic): Some ammunition manufacturers have developed and launched small-caliber ammunition with a muzzle velocity of approx. 216 m/s (710 fps). This subsonic ammunition was developed for quiet use in conjunction with a sound moderator . This ammunition is considerably slower than commercially available small-caliber ammunition with a muzzle velocity of approx. 320 m/s (1050 fps). With
Is the use of subsonic ammunition in ANSCHÜTZ small bore rifles permitted? Read more "
Please only use original ANSCHÜTZ compressedcompressed air cylinders and always observe the operating instructions! ANSCHÜTZ accepts no liability for damage of any kind caused by alteration of parts, conversion or installation of non-original ANSCHÜTZ parts or failure to observe the operating instructions. ATTENTION: The use of non-original ANSCHÜTZ compressedcompressed air cylinders will damage your air rifle and invalidate the warranty. Further
Can NOT original ANSCHÜTZ-compressed air cylinders be used in ANSCHÜTZ rifles ? Read more "
According to the current status of the German Weapons Act (2021), only those air rifles that have the F in the pentagon are to be considered license-free, unless they were manufactured before 01.01.1970. Since ANSCHÜTZ air rifles with the "F mark" are not subject to gun registration, research in our production documents is very time-consuming. A fee-based check as to whether your air rifle is classified as permission-free
When are ANSCHÜTZ air rifles to be considered permit-free? Read more "
Yes, there are labeling requirements under the Weapons Act, and not only in Germany.
Due to the high demand, we ask for your understanding that we cannot answer enquiries in this regard individually. However, all published technical information on our products is available on our website. Our product database provides a comprehensive overview. More precise details can be found, for example, in our operating instructions, which are also available for download.
No. This match trigger does not fit here due to its design.
Does the match trigger of the 5018 series fit the 1770 / 1771 model? Read more "
We have created a short overview sheet for you here. Please see the information in the download. The points listed there are for guidance only and only provide a rough guideline. You will find more detailed and up-to-date information in the applicable statutory provisions, laws and regulations.
What is the legal basis for firearms in Germany? Read more "
Yes, this is possible. Please ensure that no moisture gets into the compressed air cylinder .
Can compressed air cylinders be filled with a hand pump? Read more "
Yes, for about two years during the 1980s it was a legal requirement to have the serial number on the barrel. The rifle serial number is always located on the receiver. In the case of air rifles from model 9015 onwards, it is always on the barrel (jacket).
The serial number of my rifle is on the barrel and not on the receiver. Is that correct? Read more "
Directly to the product website:
© J.G. Anschütz GmbH & Co. KG
