Do the ANSCHÜTZ rear sights fit on the prism rail of the LaserPower?
Yes.
Do the ANSCHÜTZ rear sights fit on the prism rail of the LaserPower? Read more "
FAQs
What is my rifle still worth?
First of all, the age of a rifle is decisive for its value. If you do not know the age of the rifle, read our information on age determination here. Other factors for determining the value are the condition, the shooting performance and possibly the collector's value. To assess the value of a rifle, please contact your specialist dealer, who will be able to provide you with
Does ANSCHÜTZ still represent double set triggers?
No. We no longer have any double set triggers in our production program.
Does ANSCHÜTZ still sell double set trigger - Triggers Read more "
What is the effect of the different barrel lengths?
Advantages of the long barrel (690 mm):a) results in a higher total weight and thus less movement when ready to fire and during the aiming process.b) results in a longer max. length of aiming and thus enables more precise aiming.c) results in better weight distribution for prone shooting and three-position competition (3 x 40). Advantages of the long barrel (660 mm):a) slightly shorter and smaller diameter, for
What effect do the different barrel lengths have? Read more "
Can ANSCHÜTZ compressed air / compressed air cartridges be serviced and repaired by the user?
No! compressed air cylinders must be sent to ANSCHÜTZ for maintenance and repair by both the end user and the dealer. For safety reasons, only the manufacturer may carry out work on the cartridges.IMPORTANT:Repairs to compressed air cylinders may only be carried out by the manufacturer using original spare parts. Only original ANSCHÜTZ compressed air cylinders (max. 200 bar) may be used! Non-compliance will invalidate the
Can the design improvements of the S2 version also be retrofitted to the 8002 model?
Yes, all improvements to the S2 version can be retrofitted to both our 9003 Premium air rifle models and our 8002 models. However, only as long as the tuning conversion kit is available.
Can the design improvements of the S2 version also be retrofitted to the 8002 model? Read more "
The trigger is mounted at the rear of the Match 54, which makes it difficult to use cocking . What can I do?
Never mount the trigger at the rear end of the bolt. The firing pin must be over-cocked to close the bolt . If the trigger is mounted too far forward, the impact energy will not be sufficient, resulting in misfires. When cocked, measure the length of the signal pin protruding from the rear end of the firing pin. If
Does the use of high-speed .22 l.r. ammunition affect the service life of the barrels?
Basically yes. The quality of the steel used is decisive for the service life of a barrel. ANSCHÜTZ uses only the best materials in the manufacture of its barrels, which means that the use of high-speed ammunition is also possible in principle. However, we would like to point out that the critical point when using high-speed ammunition tends to be in the chamber area.
Does the use of high-speed .22 l.r. ammunition affect the service life of the barrels? Read more "
Can small bore rifles generally be cleaned with a brush instead of cleaning wicks?
We recommend the use of cleaning wicks after every training session or competition. After approx. 5000 shots you should clean the barrel with a brass/bronze brush . Nylon brushes are not as effective. We still recommend using only oil for cleaning.
Can KK rifles always be cleaned with a brush instead of cleaning wicks? Read more "
Are LaserPower rifles prima facie weapons?
The ANSCHÜTZ LaserPower models from version II as well as the Profiset versions with blue stock and/or the inscription "LaserLauf" and "LaserPower" are no longer subject to the apparent weapons paragraph. The following applies to LaserPower rifles of the first generation (version I with light-colored wooden stock): Due to the new Weapons Act that came into force on April 1, 2008, ANSCHÜTZ has issued the following information in a letter upon request
