Dealer portal

Accessories and spare part

ERATAC block mount 30mm, BH 20mm, 0-70 MOA


Adjustable from 0 - 70 MOA in steps of 10 MOA each. It is not necessary to remove telescopic sight and mount. Adjustment on the on the weapon possible. 100% repeat accuracy and shooting stability.
Further information
item no.: 018174

ERATAC block mounts 2" extended, 30mm, BH 22mm, 20 MOA


95 mm long contact surface for a tight and backlash-free fit on the Picatinny rail. Available with ring diameters of 30 and 34 mm in 2 different heights, with or without 20 MOA pre-tilt. lock up via hexagon nut (T5 series).
Further information
item no.: 018075

ERATAC mount with level for Picatinny rail


You can use the bubble level to correct your position and thus avoid tilting.
Further information
item no.: 018179

ERATAC holder with bubble level for universal interface


Suitable for the interface adapters of ERATAC riflescope mounts. The level can be mounted on either the left or right side. This enables precise alignment of the weapon, a correction of the aiming point and thus prevents the weapon from tilting.
Further information
item no.: 018178

ERATAC ring mounting 30mm, BH 13mm


Made of high-strength aluminum and hard-anodized according to Mil-Spec. Type III matt black. They are available in a version with hexagon nuts. Each 25 mm wide ring is equipped with our UNIVERSAL interface. interface. Available with rings in diameter 30 mm and 34 mm in various heights.
Further information
item no.: 018176

ERATAC ring mounting T5004-0013, D 34mm, BH 13mm


Made of high-strength aluminum and hard-anodized according to Mil-Spec. Type III matt black. They are available as quick-detachable versions with safety levers or with hexagonal nuts; the former make the use of tools superfluous. Thanks to their adjustability, the levers can be...
Further information
item no.: 016470

ERATAC shot angle compensator


When firing accurately at long range, at very high or very low targets, a changed point of impact must be taken into account due to the deviating bullet trajectory. Shot angle compensators (SWK) make it possible to calculate the trajectory compensation to be set. ...
Further information
item no.: 018177

Picatinny rail for 1710 - MOA 30, aluminum


For mounting optical sights. Suitable for all models of the 1710/1712 series. 30 MOA forward tilt.
Further information
item no.: 018757

Picatinny rail for 1727 F - MOA 30, aluminum


For mounting optical sights. Suitable for all models of the 1727 F series. With 30 MOA forward tilt.
Further information
item no.: 018758

Scroll up