54.30 ONE benchrest

Forward-thinking design with significant impact

Content
    Add a header to begin generating the table of contents
    Previous slide
    Next slide

    Shown with optional equipment. Supplied without sight set. Selection of sight set via the product configurator or via the accessories program.

    Previous slide
    Next slide

    Shown with optional equipment. Supplied without sight set. Selection of sight set via the product configurator or via the accessories program.

    Exceeding sporting goals

    Discover the revolutionary ONE stock design for ANSCHÜTZ small bore actions 54.30 - The upgrade for your .22 l.r. target rifle! Level up to a modern aluminum stock and reach new athletic heights with your familiar barreled action. With modern, futuristic elegant design and optimal comfort, the ONE stock offers flexibility and precision simultaneously. Enjoy the unique balance of this stock, combined with the vibration behavior which is unique to aluminum stocks, and close to the classic wooden stocks. This is achieved by clamping the action with only one high-strength synthetic clamping sleeve, which evenly absorbs and dissipates vibrations.

    FEATURES

    Barreled action - 54.30

    Combines decades of experience with modernity

    The ejection window has been moved 30 mm to the rear, towards the shooter, for even better ergonomics.

    1 of 5

    On the sleeve there is an 11 mm prism rail for mounting a diopter.

    2 of 5

    The barrel is screwed deep into the sleeve. This distributes the stresses over a large area, which increases precision.

    3 of 5

    ANSCHÜTZ Precisiontarget barrel

    4 of 5

    The 660 mm barrel is extended by a muzzle tube to achieve an even longer sighting line. An 11 mm prism rail is attached to the muzzle tube for mounting a front sight tunnel.

    5 of 5

    The new ANSCHÜTZ Target small bore barreled action 54.30 is the further development of the legendary ANSCHÜTZ Match 54 barreled action. Barreled action 54.30 combines new ideas and requirements from the modern target shooting with components that have been tried and tested for decades.

    • The basis for the new development is the well-known and proven Barreled action Match 54.
    • The ejection window has been moved back by 30 mm and reduced in size by 18%. This improves the ergonomics when shooting and increases the stiffness of the case by 33%.
    • The bolt and the firing pin were shortened by 30 mm.
    • The weight of the firing pin has been reduced, thus reducing the locktime with the same force of the firing pin spring.
    • The shooting performance is further improved by the newly developed match cartridge bearing.
    • In the Barreled action Match 54.30, the barrel is screwed deeply into the sleeve in order to distribute the tension created in the joint as evenly as possible and over a large area.
    • Maintenance-friendly and durable overall construction, as usual with ANSCHÜTZ.

    Trigger - 5018

    The perfect interface between man and rifle

    The robust housing of the trigger protects the high-precision fine parts.

    1 of 3

    The trigger blade can be adjusted in many ways. Whether swivelling, sliding or adjusting the height - this trigger blade leaves nothing to be desired.

    2 of 3

    The smooth-running sliding safety guarantees maximum safety.

    3 of 3
    ANSCHÜTZ triggers are known worldwide for their quality. The trigger 5018, which breaks like glass, leaves nothing to be desired. With a set trigger weight of 125 g, this trigger leaves our factory in Ulm. The trigger weight can be adjusted from 60 g - 490 g to suit your individual needs. The trigger blade can be moved, swivelled and adjusted in height. There is nothing better!

    stock - ONE

    Pioneering design

    The forward-thinking design of the ONE stock enables seamless integration of an existing 54.30 barreled action and can be perfectly adapted to it. A self-centering synthetic clamping sleeve connects the stock and barreled action and ensures a unique and always consistent vibration behavior - similar to a wooden stock! In addition, many existing ONE air rifle stock accessories can be fitted to the rear stock. It is also possible to fit the complete ONE air rifle rear stock! The grip can be selected in sizes S, M and L via the configurator.

    Level 2

    The aluminum-hook butt plate 4765 is versatile and can be easily adapted to individual requirements.

    1 of 8

    The Cheek piece can be infinitely adjusted in almost any direction and can thus be optimally adapted to each shooter.

    2 of 8

    By simply loosening just one screw, the buttstock incl. grip can be separated from the fore-end in seconds and then reassembled with repeat accuracy and backlash-free to form a 100 % tight connection.

    3 of 8

    The trigger guard protects your trigger from shocks.

    4 of 8

    Ergonomically designed support handle.

    5 of 8

    The high-strength fore-end encloses the barrel, creates stability and offers space for additional weights that can be attached to the carbon tube.

    6 of 8

    The grip is made of beautifully grown walnut and has a hollowed-out inside. This allows the stock to be brought even closer to the body.

    7 of 8

    The SOLID Vario support wedge is movable and can be tilted/swiveled laterally by almost 360 degrees around the carbon tube on the ONE shaft. 

    8 of 8

    System connection - ONE

    Unleash your true potential.

    The collet chuck ensures a firm connection between the shank and Barreled action.

    1 of 1

    The ONE stock concept allows the KK-Barreled action to swing comfortably from shot to shot. The high-strength, self-centering plastic collet holds the Barreled action securely in the action carrier, and transmits the vibrations from the ready to fire evenly to the stock - for an always even and smooth swinging action, which is unique in the aluminumstocks range.

    Steel core - ONE

    Perfectly balanced

    The core of the buttstock is made of steel, which also acts as a counterweight to the fore-end and thus perfectly balances the rifle.

    1 of 1

    The 20 mm offset of the rear shaft allows it to be brought even closer to the body.

    1 of 1

    The core of the rear stock is made of high-quality steel. This creates a counterweight to the fore-end, which balances it perfectly. The rear stock is offset by 20 mm, allowing the rifle to be brought even closer to the body.

    Butt plate connection - ONE

    Wide range of possibilities

    The butt plate bracket offers the option of mounting various butt plates from all well-known manufacturers.

    1 of 1

    The ONE stock comes with the familiar PRECISE butt plate extension. This offers the familiar and proven options for mounting a wide range of butt plates from all well-known manufacturers. Existing PRECISE butt plates or ANSCHÜTZ butt plate 4765 (formerly 2213-8700) can also be fitted without any problems.

    Cheek piece connection - ONE

    Repeatable use

    The positive fit enables the cheek piece to be mounted with repeat accuracy.

    1 of 1

    The red safety ring enables a positive fit with the rear stock. This makes it easy to mount the cheek piece quickly and with repeat accuracy. The advantage of this safety ring is obvious: a complete cheek piece can be purchased and perfectly adjusted for each shooting position. Thanks to the positive fit, the safety ring guarantees that the various cheek pieces are always positioned consistently without having to make any changes to the cheek piece itself. 

    Order and scope of deliverey stocks

    • VARIO-palm rest 4844
    • PRECISE butt plate carrier
    • Quick couplers adapter
    • Assembly instructions
    • Tool set

    item no.: 018500 (grip S, right)
    item no.: 018498 (grip M, right)
    item no.: 018501 (grip L, right)

    Order and scope of deliverey rifle configuration

    The following items are always included in the delivery, regardless of how you configure the product!

    • Transport rifle case MEGA
    • Solid support wedge with quick clamping
    • Support handle
    • ONE cheek piece adjustment
    • Rear sight shift
    • sight raiser block
    • PRECISE butt plate carrier
    • butt plate 4765 without hook
    • Quick couplers adapter
    • Assembly instructions
    • Tool set
    • Quality control card with original test fire group

    Available standard configurations

    item no.: 019211 (grip M, right)
    item no.: 019212 (grip L, right)
    item no.: 019226 (grip M, left)
    item no.: 019227 (grip L, left)

    Configurator

    Your personal 54.30 ONE benchrest - According to your wishes

    Caliber

    Tailored to your needs

    .17 Mach 2

    • number of grooves: 6
    • twist rate 228 mm

    .17 HMR

    • number of grooves: 6
    • twist rate 228 mm

    .22 l.r.

    • number of grooves: 8
    • twist rate 420 mm

    .22 WMR

    • Number of grooves: 4
    • twist rate 400 mm

    1761 Run lengths

    Select your desired barrel length

    14 inch (356 mm)

    • Barrel muzzle diameter: 19 mm

    18 inch (457 mm)

    • Barrel muzzle diameter: 19 mm

    20.3 inch (515 mm)

    • Barrel muzzle diameter: 19 mm

    1761 Running options

    Choose your desired barrel equipment  

    Recessed muzzle

    barrel thread ½ inch - 20 UNF

    barrel thread ½ inch - 28 UNEF

    Internal barrel thread M12 x 1 and alignment sighting

    • The barrel is equipped with an M12x1 female thread and a fast acquisition sight .

    Only possible in combination with barrel length 515 mm (20.3 inches) and 584 mm (23 inches)

    Recommended accessories for your ANSCHÜTZ hunting rifle

    For the finishing touch

    1761 Magazine, 5-shot, .22 WMR & .17 HMR

    Soft case for hunters and target shooters

    For the safe transport of your hunting or sporting rifle. As a special feature, the new carrying strap system allows you to carry the case on your back - incl. case lock.

    1761 Cartridge loading aid

    1761 Picatinny rail, 0 MOA forward tilt

    1761 Magazine, 10-shot

    1761 trigger guard aluminum

    Recommended accessories for your air rifle

    For the finishing touch

    Soft case for hunters and target shooters

    For the safe transport of your hunting or sporting rifle. As a special feature, the new carrying strap system allows you to carry the case on your back - incl. case lock.

    Configuration

    OVERVIEW

    Caliber
    1761 Run lengths
    1761 Running options
    Recommended accessories for your ANSCHÜTZ hunting rifle
    Recommended accessories for your air rifle

    Dealer search

    Special field

    Legend

    Special awards

    ANSCHÜTZ Premium Dealer - Complete
    ANSCHÜTZ Premium Dealer - Hunting
    ANSCHÜTZ Service Point - Hunting
    ANSCHÜTZ Premium Dealer - biathlon
    ANSCHÜTZ Premium Dealer - Sport
    ANSCHÜTZ Service Point - Sport
    ANSCHÜTZ Premium Dealer - APR
    ANSCHÜTZ Premium Dealer - LaserPower

    General:

    Test Center
    gunsmith
    Spare parts warehouse
    Retail shop
    Online shop
    Shooting cinema
    shooting range
    Trained specialist dealer

    J.G. ANSCHÜTZ GmbH & Co.KG

    Jagd- und Sportwaffenfabrik

    No direct sales at ANSCHÜTZ!
    Special field
    • Hunting
    • Biathlon
    • Sport
    • APR
    • Laser Power

    Technical data

    Downloads

    Other interesting models

    Small bore

    Small bore

    Small bore

    Small bore

    Small bore

    Small bore




    [um-cta class="cta-desktop" target="test"]
    Scroll up